GrpcPrint/PrintS/Controller/UIBean.h

#pragma once

#include <functional>
#include <vector>
#include <time.h>
#include "../config/bean/IOCfg.h"
#include "../log/Jobbean.h"

struct SystemAssist {
	uint64_t exitTickCount;
	uint64_t exitSumTime;
	int lockShowTextWidth;
	SystemAssist() {
		exitTickCount = 0;
		exitSumTime = 0;
		lockShowTextWidth = 0;
	}
};

struct PowderAssistBean
{
	double powderRpos;
	double moldRpos;
	double armRPos;

	bool isSupplyPositiveRepeat;
	bool isSupplyNegativeRepeat;
	bool isMoldUpRepeat;
	bool isMoldDownRepeat;
	bool isArmFrontRepeat;
	bool isArmBackRepeat;
	bool isLoadLeftRepeat;
	bool isLoadRightRepeat;
	//bool isCleanUpRepeat;
	//bool isCleanDownRepeat;

	bool isLeftExpand;
	PowderAssistBean() {
		armRPos = 0;
		moldRpos = 0;
		powderRpos = 0;
		isArmFrontRepeat = false;
		isArmBackRepeat = false;
		isMoldUpRepeat = false;
		isMoldDownRepeat = false;
		isSupplyPositiveRepeat = false;
		isSupplyNegativeRepeat = false;
		isLeftExpand = false;
	}
};

struct StateColumnBean
{
	float columnFix;
	float columnWidth;
	StateColumnBean() {

	}
	StateColumnBean(float fix, float width) {
		columnFix = fix;
		columnWidth = width;
	}
};

struct ComSetAssistBean
{
	float chilerTargeValue;
	float tempCtrlTargeValue;
	float upsShutdownTime;
	float purifierBlowSpeed;

	bool purifierDedust;
	bool purifierBoxClean;
	bool purifierBlowBack;
	bool purifierWash;
	bool purifierMidClean;
	bool purifierHighClean;
	bool purifierHopperClean;

	float oxygenTitleWidth;
	float chillerTitleWidth;
	float upsTitleWidth;
	float axisTitleWidth;
	float tempctrlTitleWidth;
	float staTitleWidth;

	explicit ComSetAssistBean() {
		chilerTargeValue = 0;
		tempCtrlTargeValue = 0;
		upsShutdownTime = 0;
		purifierBlowSpeed = 0;
		purifierDedust = false;
		purifierBoxClean = false;
		purifierBlowBack = false;
		purifierWash = false;
		purifierMidClean = false;
		purifierHighClean = false;
		purifierHopperClean = false;
		chillerTitleWidth = 100.0f;
		oxygenTitleWidth = 100.0f;
		upsTitleWidth = 100.0f;
		axisTitleWidth = 100.0f;
		tempctrlTitleWidth = 100.0f;
		staTitleWidth = 100.0f;

	}
};

struct ScanDebugBean {
	bool isScanParamSelected;
	bool isCorrectParamSelected;
	bool isScanTestSelected;
	bool isPowerSelected;
	bool isSkyWritingSelected;
	int addPowerPercent;
	float addPowerValue;
	unsigned int addTimePowerStart;
	unsigned int addTimePowerEnd;
	float addTimePowerValue;

	explicit ScanDebugBean() {
		isScanParamSelected = true;
		isCorrectParamSelected = false;
		isScanTestSelected = false;
		isPowerSelected = false;
		isSkyWritingSelected = false;
		addPowerPercent = 0;
		addPowerValue = 0;
		addTimePowerStart = 0;
		addTimePowerEnd = 0;
		addTimePowerValue = 1.0f;
	}
};

struct PurifierShowBean {
	bool isPurifierStateSelected;
	bool isPurifierSettingSelected;

	float boxPressureUpLimit;			//箱体压力上限设定
	float boxPressureDownLimit;			//箱体压力下限设定
	float midPressureDifAlarmValue;		//中效过滤器压差报警设
	float highPressureDifAlarmValue;	//高效过滤器压差报警设	
	float printCleanOxygenSetValue;		//打印室氧清洗氧含量设
	float windSetValue;					//风速设定
	float maxWindSetValue;				//最大风速
	float printOxygenDownSetValue;			//打印氧下限设定
	float printOxygenUpSetValue;			//打印氧上限设定
	float filterCleanOxygenSetValue;	//过滤器清洗氧含量设定
	float midTempHighSetValue;			//中效高温报警设定
	float midTempUltraSetValue;			//中效超高温报警设定
	float highTempHighSetValue;			//高效高温报警设定
	//float highTempUltraSetValue;		//高效超高温报警设定
	float pressureRangeUpLimit;	//压力量程上限设定
	float pressureRangeDownLimit; //压力量程下限设定
	float oxygenAlarmValue;  //打印氧超上限设定
	unsigned short hopperCleanRemind;	//清理料斗提醒设定
	unsigned short boxWashDelayTime;
	unsigned short dedustingWashDelayTime;
	unsigned short blowBackBlowTime;
	unsigned short blowBackSetTimes;
	unsigned short ProtectionPressureSetTime;

	float coverWindSpeedOffset;
	bool isCoverWind;
	bool coverWindSlowFinish;
	bool coverWindResumeFinish;
	bool shieldMonitorPrintPressure;
	explicit PurifierShowBean() {
		isPurifierStateSelected = true;
		isPurifierSettingSelected = false;
		shieldMonitorPrintPressure = false;
		coverWindResumeFinish = true;
		boxPressureUpLimit = 0;
		boxPressureDownLimit = 0;
		midPressureDifAlarmValue = 0;
		highPressureDifAlarmValue = 0;
		printCleanOxygenSetValue = 0;
		windSetValue = 0;
		maxWindSetValue = 0.0f;
		printOxygenDownSetValue = 0;
		printOxygenUpSetValue = 0;
		filterCleanOxygenSetValue = 0;
		midTempHighSetValue = 0;
		midTempUltraSetValue = 0;
		highTempHighSetValue = 0;
		//highTempUltraSetValue = 0;
		hopperCleanRemind = 0;
		boxWashDelayTime = 0;
		dedustingWashDelayTime = 0;
		pressureRangeUpLimit = 0;
		pressureRangeDownLimit = 0;
		oxygenAlarmValue = 0;
		coverWindSpeedOffset = 0.0f;
		isCoverWind = false;
		coverWindSlowFinish = false;
		blowBackBlowTime = 0;
		blowBackSetTimes = 0;
		ProtectionPressureSetTime = 0;
	}
};

struct JobAssist {
	char preLayerName[100];
	unsigned int preLayerIndex;
	bool isFirst;
	JobBean continueJob;
	explicit JobAssist() {
		preLayerIndex = 0;
	}
};

struct MenuAssist {
	bool isAddTaskClick;
	explicit MenuAssist() {
		isAddTaskClick = false;
	}
};

struct IoAssist {
	IOCfg* homeOcfg;
	explicit IoAssist() {
		homeOcfg = NULL;
	}
};

struct ConfigAssist {
	bool isPrintConfigSelected;
	bool isAlarmConfigSelected;
	explicit ConfigAssist() {
		isAlarmConfigSelected = true;
		isPrintConfigSelected = false;
	}
};



struct LogAssist {
	tm selectBeginTime;
	tm selectEndTime;
	int layer_selected_param;
	int layer_selected_style;
	int layer_selected_base;
	static const int PARAM_LENGTH = 14;
	string layer_selected_id;
	vector<double> paramValue[PARAM_LENGTH];
	vector<double> paramIndex;
	string yUnit;
	double minValue[PARAM_LENGTH];
	double maxValue[PARAM_LENGTH];
	string yTitle;
	bool isExportData;
	bool isExportAxisData;
	bool isExportImage;
	bool isExportScanData;
	int64_t selected_servo_row;
	int64_t m_SelectedServoLogRow;
	int64_t selected_sp_id;
	int64_t selected_if_id;
	string showName;
	explicit LogAssist() {
		time_t t = time(nullptr);
		selectBeginTime = *localtime(&t);
		selectEndTime = *localtime(&t);
		layer_selected_param = 0;
		layer_selected_style = 0;
		layer_selected_base = 0;
		isExportData = true;
		isExportImage = false;
		isExportAxisData = true;
		isExportScanData = false;
		yTitle = "PPM";
		time_t temp;
		time(&temp);
		localtime_s(&selectBeginTime, &temp);
		localtime_s(&selectEndTime, &temp);
		selected_servo_row = -1;
		selected_sp_id = -1;
	}
};

struct MotionDrawAssist
{
	float loadRPos;
	float moldRpos;
	float armRPos;
	bool isPrintPressure;
	bool isPrintMoldSupprt;
	bool isPrintJackup;
	bool isInPrintPos;

	bool isCleanPressure;
	bool isCleanConnect;
	bool isCleanClose;
};