#include "PowderSupplySimpleClient.h"
//#include "S7Command.h"
#include "../SystemInfo.h"
#include "../external/imgui/imgui_custom.h"
#include "../LanguageManager.h"
#include "../config/ConfigManager.h"
#include <atlbase.h>
#include "../Toast.h"
//#include "../ScannerCtrl/BaseCtrl.h"
#include "../utils/DataByte.h"

PowderSupplySimpleClient::PowderSupplySimpleClient(void* pconfig) :S7Client(pconfig)
	, m_PressureWriteValue(new StrData("PressureWriteValue",u8"压力写入值"))
{
	m_RunCfg = ConfigManager::Instance()->GetRunCfg();
	m_ExtCfg = ConfigManager::Instance()->GetExtCfg();
	//m_PowderEstimateCfg = ConfigManager::Instance()->GetPowderEstimateCfg();
	IOCfgWrapper* iw = ConfigManager::Instance()->GetIoCfgWrapper();
	m_IOCfgWrapper = iw;
	m_AutoSupplyThread = INVALID_HANDLE_VALUE;
	m_AutoSupplyFlag = false;
	m_InfoTick = GetTickCount64();

	size_t ptrSize = sizeof(nullptr);   //指针大小
	void* startPtr = &m_ClientState.m_startFlag + 1;
	size_t count = ((size_t)&m_ClientState.m_endFlag - (size_t)startPtr) / ptrSize;
	InsertMp(startPtr, count);

	startPtr = &m_ShowAssist.m_startFlag + 1;
	count = ((size_t)&m_ShowAssist.m_endFlag - (size_t)startPtr) / ptrSize;
	InsertMp(startPtr, count);

	InsertMp(&m_PressureWriteValue, 1);

}


PowderSupplySimpleClient::~PowderSupplySimpleClient()
{
	m_AutoSupplyFlag = false;
	if (m_AutoSupplyThread != INVALID_HANDLE_VALUE) {
		if (WaitForSingleObject(m_AutoSupplyThread, 500) == WAIT_TIMEOUT)
		{
			TerminateThread(m_AutoSupplyThread, 1);
		}
		CloseHandle(m_AutoSupplyThread);
		m_AutoSupplyThread = INVALID_HANDLE_VALUE;
	}
	//RequestSupplyStop();
	Sleep(500);

	Shutdown();
}

//void PowderSupplySimpleClient::InitCommand()
//{
//	S7Command* pcommand = new S7Command(S7_COMMAND_READ_INFO, READ_ITEM_COUNT);
//	TS7DataItem* items = pcommand->getDataItems();
//
//	items[0].Area = S7AreaDB;
//	items[0].WordLen = S7WLByte;
//	items[0].DBNumber = 1;
//	items[0].Start = 0;
//	items[0].Amount = 3;
//	items[0].pdata = new unsigned char[3];
//
//	items[1].Area = S7AreaDB;
//	items[1].WordLen = S7WLByte;
//	items[1].DBNumber = 1;
//	items[1].Start = 105;
//	items[1].Amount = 1;
//	items[1].pdata = new unsigned char[1];
//
//	items[2].Area = S7AreaDB;
//	items[2].WordLen = S7WLByte;
//	items[2].DBNumber = 1;
//	items[2].Start = 200;
//	items[2].Amount = 35;
//	items[2].pdata = new unsigned char[35];
//
//	pcommand->m_Ref = this;
//	pcommand->m_Fun = &PowderSupplySimpleClient::ProcReadInfo;
//	pcommand->isNeedDel = false;
//
//	//写压力
//	S7Command* pressureCom = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* dataItem = pressureCom->getDataItems();
//	dataItem[0].Area = S7AreaDB;
//	dataItem[0].DBNumber = 1;
//	dataItem[0].Start = 226;
//	dataItem[0].WordLen = S7WLByte;
//	dataItem[0].Amount = 4;
//	unsigned char* pfloat = new unsigned char[4];
//	S7FLOATDATA fdata;
//	fdata.fValue = g_SystemInfo->m_EnvState.m_PowderJarCabinPressureVoltage;
//	pfloat[0] = fdata.data[3];
//	pfloat[1] = fdata.data[2];
//	pfloat[2] = fdata.data[1];
//	pfloat[3] = fdata.data[0];
//	dataItem[0].pdata = pfloat;
//	//char* temp= (char*)dataItem[0].pdata;
//	m_PressureWriteValue->SetValue((char*)dataItem[0].pdata);
//
//	pressureCom->m_Ref = this;
//	//pressureCom->m_Fun = &PowderSupplySimpleClient::ProcWriteValueXT;
//	pressureCom->isNeedDel = false;
//	pressureCom->m_PreWrite = &PowderSupplySimpleClient::ProcSetPressureValue;
//
//	m_CycleCommands.push_back(pcommand);
//	m_CycleCommands.push_back(pressureCom);
//}
//
//void PowderSupplySimpleClient::ProcSetPressureValue(void *pobject, Command* pcommand)
//{
//	if (pobject == NULL)return;
//	PowderSupplySimpleClient* ppw = (PowderSupplySimpleClient*)pobject;
//	S7FLOATDATA fdata;
//	g_SystemInfo->LockInfo();
//	fdata.fValue = g_SystemInfo->m_EnvState.m_PowderJarCabinPressureVoltage;
//	g_SystemInfo->UnlockInfo();
//	unsigned char* pfloat = new unsigned char[4];
//	pfloat[0] = fdata.data[3];
//	pfloat[1] = fdata.data[2];
//	pfloat[2] = fdata.data[1];
//	pfloat[3] = fdata.data[0];
//	ppw->m_PressureWriteValue->SetValue((char*)pfloat);
//}
//
//void PowderSupplySimpleClient::ProcReadInfo(void *pobject, Command* pcommand)
//{
//	S7Command* s7Command = (S7Command*)pcommand;
//	TS7DataItem* pdataItems = s7Command->getDataItems();
//	unsigned int itemcount = s7Command->getItemCount();
//	if (pobject == NULL || itemcount != READ_ITEM_COUNT)return;
//	PowderSupplySimpleClient* ppw = (PowderSupplySimpleClient*)pobject;
//
//	TS7DataItem pReq = pdataItems[0];
//	TS7DataItem pNet = pdataItems[1];
//	TS7DataItem pCtrl = pdataItems[2];
//
//	EnterCriticalSection(&ppw->m_ValueCS);
//	if (pReq.Result == 0) {
//		unsigned char* data = (unsigned char*)pReq.pdata;
//		ppw->m_ClientState.m_RequestDropPowder->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_DropPowderEnable->SetValue(((data[0] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_OpenDropPowderValve->SetValue(((data[0] & 04) > 0 ? true : false));
//
//		ppw->m_ClientState.m_SupplyBlockAlarm->SetValue(((data[2] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyFilterBlockAlarm->SetValue(((data[2] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyJarHangUpPowderAlarm->SetValue(((data[2] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_OxygenOverLimitAlarm->SetValue(((data[2] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_DeoxygenStartupFailed->SetValue(((data[2] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyPowderStartupFailed->SetValue(((data[2] & 0x20) > 0 ? true : false));
//		ppw->m_ClientState.m_OxygenDetectorOfflineAlarm->SetValue(((data[2] & 0x40) > 0 ? true : false));
//		ppw->m_ClientState.m_FanForceRunAlarm->SetValue(((data[2] & 0x80) > 0 ? true : false));
//
//	}
//	if (pNet.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)pNet.pdata;
//		ppw->m_ClientState.m_DeoxygenActive->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_RequestSupplyPowder->SetValue(((data[0] & 0x2) > 0 ? true : false));
//	}
//	if (pCtrl.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)pCtrl.pdata;
//		S7FLOATDATA machineOxygenTarge;
//		S7FLOATDATA machineOxygenAlarm;
//		S7FLOATDATA machineOxygenRealtime;
//		S7FLOATDATA pressureDif;
//
//		ppw->m_ClientState.m_PcCtrlSupply->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_ReactiveMetals->SetValue(((data[0] & 0x2) > 0 ? true : false));
//
//		//	ppw->m_ClientState.m_SupplyBlockAlarm ->SetValue( ((data[0] & 0x4) > 0 ? true : false);
//		//	ppw->m_ClientState.m_SupplyFilterBlockAlarm ->SetValue( ((data[0] & 0x8) > 0 ? true : false);
//		ppw->m_ClientState.m_EnableHammer->SetValue(!((data[0] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_EnableNewPowderDorpFreq->SetValue(((data[0] & 0x20) > 0 ? true : false));
//
//		machineOxygenTarge.data[0] = data[7];
//		machineOxygenTarge.data[1] = data[6];
//		machineOxygenTarge.data[2] = data[5];
//		machineOxygenTarge.data[3] = data[4];
//
//		machineOxygenAlarm.data[0] = data[11];
//		machineOxygenAlarm.data[1] = data[10];
//		machineOxygenAlarm.data[2] = data[9];
//		machineOxygenAlarm.data[3] = data[8];
//
//		machineOxygenRealtime.data[0] = data[15];
//		machineOxygenRealtime.data[1] = data[14];
//		machineOxygenRealtime.data[2] = data[13];
//		machineOxygenRealtime.data[3] = data[12];
//
//		ppw->m_ClientState.m_PowderValveOpenTime->SetValue((float)((data[16] & 0xff) << 8) + (data[17] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_PowderValveCloseTime->SetValue((float)((data[18] & 0xff) << 8) + (data[19] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_AirHammerOpenTime->SetValue((float)((data[20] & 0xff) << 8) + (data[21] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_AirHammerCloseTime->SetValue((float)((data[22] & 0xff) << 8) + (data[23] & 0xff) / 10.0f);
//
//		pressureDif.data[0] = data[29];
//		pressureDif.data[1] = data[28];
//		pressureDif.data[2] = data[27];
//		pressureDif.data[3] = data[26];
//
//		ppw->m_ClientState.m_MachineOxygenTarge->SetValue(machineOxygenTarge.fValue);
//		ppw->m_ClientState.m_MachineOxygenAlarm->SetValue(machineOxygenAlarm.fValue);
//		ppw->m_ClientState.m_MachineOxygenRealtime->SetValue(machineOxygenRealtime.fValue);
//		ppw->m_ClientState.m_PressureDif->SetValue(pressureDif.fValue);
//
//		ppw->m_ClientState.m_SupplyBlockStopMinute->SetValue(((data[30] & 0xff) << 8) + (data[31] & 0xff));
//		ppw->m_ClientState.m_FanWorkTiming->SetValue(data[32]);
//		ppw->m_ClientState.m_FanWorkStopTime->SetValue(data[33]);
//		ppw->m_ClientState.m_FanCoolTime->SetValue(data[34]);
//	}
//	LeaveCriticalSection(&ppw->m_ValueCS);
//}

void PowderSupplySimpleClient::GetStat(PowderSupplySimpleStat& stat)
{
	EnterCriticalSection(&m_ValueCS);
	//memcpy_s(&stat, sizeof(PowderSupplySimpleStat), &m_ClientState, sizeof(PowderSupplySimpleStat));




	LeaveCriticalSection(&m_ValueCS);
}

//void PowderSupplySimpleClient::SetBit(int dindex, bool flag)
//{
//	if (!IsServerConnected())return;
//	EnterCriticalSection(&m_RtcCS);
//	S7Command* pcommand = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* items = pcommand->getDataItems();
//	//items[0].Area = S7AreaMK;
//	items[0].Area = S7AreaDB;
//	items[0].DBNumber = 1;
//	items[0].Start = dindex;
//	items[0].WordLen = S7WLBit;
//	items[0].Amount = 1;
//	bool* tempv = new bool[1];
//	tempv[0] = flag;
//	items[0].pdata = tempv;
//	pcommand->m_Ref = this;
//	pcommand->m_waitTime = 0;
//	m_RTCommands.push(pcommand);
//	LeaveCriticalSection(&m_RtcCS);
//}
//
//void PowderSupplySimpleClient::RequestSupplyStart()
//{
//	SetBit(0, true);
//}
//
//void PowderSupplySimpleClient::RequestSupplyStop()
//{
//	SetBit(0, false);
//}
//
//
//void PowderSupplySimpleClient::AutoSupply()
//{
//	//if (!m_PowderPositon1 || !m_PowderPositon2 || !m_PowderPositon3 || !m_PowderPositon4 || !m_PowderPositon5)return;
//	//if (m_Stat.m_PowderInhaleActive)return;
//	if (!IsServerConnected() || !IsSignalConnected())return;
//	if (!m_IOCfgWrapper->IsSafeDoorClose())return;
//	if (!m_ClientState.m_DropPowderEnable) {
//		uint64_t tnow = GetTickCount64();
//		if (tnow - m_InfoTick > 20000) {
//			g_Toast->AddToast(new ToastBean(_(u8"送粉失败：未达到送粉条件").c_str(), 5000, Toast::COLOR_ORANGE));
//			m_InfoTick = tnow;
//		}
//		return;
//	}
//	if (m_AutoSupplyThread != INVALID_HANDLE_VALUE) return;
//	m_AutoSupplyFlag = true;
//	m_AutoSupplyThread = AtlCreateThread(AutoSupplyProc, this);
//}
//
//DWORD WINAPI PowderSupplySimpleClient::AutoSupplyProc(PowderSupplySimpleClient* _this)
//{
//	if (_this) {
//		_this->AutoSupplyRun();
//		CloseHandle(_this->m_AutoSupplyThread);
//		_this->m_AutoSupplyThread = INVALID_HANDLE_VALUE;
//		_this->m_AutoSupplyFlag = false;
//	}
//	return 0;
//}
//
//void PowderSupplySimpleClient::StopAutoSupply()
//{
//	m_AutoSupplyFlag = false;
//	if (m_AutoSupplyThread != INVALID_HANDLE_VALUE) {
//		if (WaitForSingleObject(m_AutoSupplyThread, 500) == WAIT_TIMEOUT)
//		{
//			TerminateThread(m_AutoSupplyThread, 1);
//		}
//		CloseHandle(m_AutoSupplyThread);
//		m_AutoSupplyThread = INVALID_HANDLE_VALUE;
//	}
//	RequestSupplyStop();
//}
//
//
//void PowderSupplySimpleClient::AutoSupplyRun()
//{
//	g_Toast->AddToast(new ToastBean(_(u8"开始自动供粉").c_str(), 5000, Toast::COLOR_GREEN));
//
//	RequestStart();
//	
//	bool isfinish = false;
//	uint64_t tbegin = GetTickCount64();
//	unsigned int autoSupplyRunTime = 0;
//	int disconnectTimes = 0;
//	bool isDisconnect = false;
//	bool isDoorOpen = false;
//	while (m_AutoSupplyFlag) {
//
//		//if (!BaseCtrl::IsStart()) {
//		//	break;
//		//}
//		if (!m_ClientState.m_DropPowderEnable) {
//			break;
//		}
//
//		if (IsPowderEnough()) {
//			isfinish = true;
//			break;
//		}
//		uint64_t tnow = GetTickCount64();
//		autoSupplyRunTime = tnow - tbegin;
//		if (autoSupplyRunTime > m_PowderEstimateCfg->m_AutoSupplyTimeoutMinute * 60 * 1000) {
//			isfinish = true;
//			break;
//		}
//
//		if (!IsServerConnected()) {
//			disconnectTimes++;
//			if (disconnectTimes > 120) {
//				isDisconnect = true;
//				break;
//			}
//		}
//		else {
//			disconnectTimes = 0;
//		}
//
//		if (!m_IOCfgWrapper->IsSafeDoorClose()) {
//			isDoorOpen = true;
//			break;
//		}
//		Sleep(500);
//
//	}
//	if (isDisconnect) {
//		g_Toast->AddToast(new ToastBean(_(u8"由于供粉设备通讯连接中断，自动送粉中止").c_str(), 5000, Toast::COLOR_RED));
//	}
//	if (isDoorOpen) {
//		g_Toast->AddToast(new ToastBean(_(u8"舱门打开终止送粉").c_str(), 5000, Toast::COLOR_RED));
//	}
//
//	RequestSupplyStop();
//	Sleep(500);
//	if (isfinish) {
//		g_Toast->AddToast(new ToastBean(_(u8"自动供粉完成").c_str(), 5000, Toast::COLOR_GREEN));
//	}
//}
//
//bool PowderSupplySimpleClient::IsPowderEnough()
//{
//	bool rel = true;
//	if (m_ExtCfg->m_UsePowderStick) {
//		if (g_SystemInfo->GetPowderQty()*100.0f < m_PowderEstimateCfg->m_StopSupplyQty) {
//			rel = false;
//		}
//	}
//	else {
//		for (size_t i = m_PowderEstimateCfg->m_StopSupplyPos; i < m_PowderEstimateCfg->m_PEVec.size(); i++) {
//			if (!m_PowderEstimateCfg->m_PEVec[i]->m_PosSensor->IsActive()) {
//				rel = false;
//				break;
//			}
//		}
//	}
//	return rel;
//}
//
//bool PowderSupplySimpleClient::IsAutoSuppling()
//{
//	return (m_AutoSupplyThread != INVALID_HANDLE_VALUE);
//}
//
//
//void PowderSupplySimpleClient::SetReactiveMetals(bool enable)
//{
//	SetBit(200 * 8 + 1, enable);
//}
//
//void PowderSupplySimpleClient::SetDeoxygenActive(bool enable)
//{
//	SetBit(105 * 8, enable);
//}
//
//void PowderSupplySimpleClient::SetSupplyEnable(bool enable)
//{
//	SetBit(105 * 8 + 1, enable);
//}
//
//
//void PowderSupplySimpleClient::SetPCCtrlSupply(bool enable)
//{
//	SetBit(200 * 8, enable);
//}
//
//void PowderSupplySimpleClient::SetOpenDropPowderValve(bool enable)
//{
//	SetBit(2, enable);
//}
//
//void PowderSupplySimpleClient::SetStartHammer(bool enable)
//{
//	SetBit(200 * 8 + 4, enable);
//}
//
//void PowderSupplySimpleClient::SetStartNewPowderDorpFreq(bool enable)
//{
//	SetBit(200 * 8 + 5, enable);
//}
//
//void PowderSupplySimpleClient::SetDBFloat(int dindex, float fvalue)
//{
//	EnterCriticalSection(&m_RtcCS);
//	S7Command* pcommand = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* items = pcommand->getDataItems();
//	items[0].Area = S7AreaDB;
//	items[0].DBNumber = 1;
//	items[0].Start = dindex;
//	items[0].WordLen = S7WLByte;
//	items[0].Amount = 4;
//	unsigned char* pfloat = new unsigned char[4];
//	S7FLOATDATA fdata;
//	fdata.fValue = fvalue;
//	pfloat[0] = fdata.data[3];
//	pfloat[1] = fdata.data[2];
//	pfloat[2] = fdata.data[1];
//	pfloat[3] = fdata.data[0];
//	items[0].pdata = pfloat;
//	pcommand->m_Ref = this;
//	//pcommand->m_Fun = &PurifierClient::ProcWriteValueXT;
//	m_RTCommands.push(pcommand);
//	LeaveCriticalSection(&m_RtcCS);
//}
//
//void PowderSupplySimpleClient::SetDBWord(int dindex, unsigned short fvalue)
//{
//	EnterCriticalSection(&m_RtcCS);
//	S7Command* pcommand = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* items = pcommand->getDataItems();
//	items[0].Area = S7AreaDB;
//	items[0].DBNumber = 1;
//	items[0].Start = dindex;
//	items[0].WordLen = S7WLByte;
//	items[0].Amount = 2;
//	unsigned char* pfloat = new unsigned char[2];
//	S7WORDDATA fdata;
//	fdata.wValue = fvalue;
//	pfloat[0] = fdata.data[1];
//	pfloat[1] = fdata.data[0];
//	items[0].pdata = pfloat;
//	pcommand->m_Ref = this;
//	//pcommand->m_Fun = &PurifierClient::ProcWriteValueXT;
//	m_RTCommands.push(pcommand);
//	LeaveCriticalSection(&m_RtcCS);
//}
//
//void PowderSupplySimpleClient::SetDBByte(int dindex, unsigned char fvalue)
//{
//	EnterCriticalSection(&m_RtcCS);
//	S7Command* pcommand = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* items = pcommand->getDataItems();
//	items[0].Area = S7AreaDB;
//	items[0].DBNumber = 1;
//	items[0].Start = dindex;
//	items[0].WordLen = S7WLByte;
//	items[0].Amount = 1;
//	unsigned char* pfloat = new unsigned char[1];
//	//	S7WORDDATA fdata;
//	//	fdata.usValue = fvalue;
//	pfloat[0] = fvalue;
//	items[0].pdata = pfloat;
//	pcommand->m_Ref = this;
//	//pcommand->m_Fun = &PurifierClient::ProcWriteValueXT;
//	m_RTCommands.push(pcommand);
//	LeaveCriticalSection(&m_RtcCS);
//}
//
//void PowderSupplySimpleClient::SetMachineDeoxygenTarge(float fvalue)
//{
//	SetDBFloat(204, fvalue);
//}
//
//void PowderSupplySimpleClient::SetMachineOxygenAlarm(float fvalue)
//{
//	SetDBFloat(208, fvalue);
//}
//
//void PowderSupplySimpleClient::SetPowderValveOpenTime(unsigned short fvalue)
//{
//	SetDBWord(216, fvalue);
//}
//
//void PowderSupplySimpleClient::SetPowderValveCloseTime(unsigned short fvalue)
//{
//	SetDBWord(218, fvalue);
//}
//
//void PowderSupplySimpleClient::SetAirHammerOpenTime(unsigned short fvalue)
//{
//	SetDBWord(220, fvalue);
//}
//
//void PowderSupplySimpleClient::SetAirHammerCloseTime(unsigned short fvalue)
//{
//	SetDBWord(222, fvalue);
//}
//
//void PowderSupplySimpleClient::SetSupplyBlockStopMinute(unsigned short value)
//{
//	SetDBWord(230, value);
//}
//
//void PowderSupplySimpleClient::SetFanWorkTiming(unsigned char value)
//{
//	SetDBByte(232, value);
//}
//
//void PowderSupplySimpleClient::SetFanCoolTime(unsigned char value)
//{
//	SetDBByte(234, value);
//}
//
//void PowderSupplySimpleClient::SetFanWorkStopTime(unsigned char value)
//{
//	SetDBByte(233, value);
//}

//void PowderSupplySimpleClient::DrawUI(bool* isshow)
//{
//	PowderSupplySimpleStat powderSupplyStat;
//	GetStat(powderSupplyStat);
//	//ImGui::SetNextWindowSize(ImVec2(780, 420));
//	ImGui::Begin(_(u8"供粉状态").c_str(), isshow, ImGuiWindowFlags_NoDocking | ImGuiWindowFlags_NoNav | ImGuiWindowFlags_AlwaysAutoResize);
//	ImGui::BeginGroup();
//
//	if (IsServerConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉端口连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉端口连接：断开").c_str());
//	if (IsSignalConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉通讯连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉通讯连接：断开").c_str());
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	ImGui::Checkbox(_(u8"打印自动送粉").c_str(), &m_PowderEstimateCfg->m_AutoSupplyEnable);
//	ImGui::Text(_(u8"自动送粉状态：%s").c_str(), IsAutoSuppling() ? _(u8"启动").c_str() : _(u8"停止").c_str());
//	if (IsAutoSuppling()) {
//		if (ImGui::Button(_(u8"中断自动送粉").c_str(), ImVec2(150, 0))) {
//			StopAutoSupply();
//		}
//	}
//
//	ImGui::Text(_(u8"自动送粉超时分钟：").c_str()); ImGui::SameLine();
//	ImGui::PushID("AutoSupplyTimeoutMinute");
//	ImGui::PushItemWidth(40);
//	ImGui::InputScalar("", ImGuiDataType_U32, &m_PowderEstimateCfg->m_AutoSupplyTimeoutMinute, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue);
//	ImGui::PopItemWidth();
//	ImGui::PopID();
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	m_ShowAssist.m_RequestDropPowder = powderSupplyStat.m_RequestDropPowder;
//	if (ImGui::Checkbox(_(u8"请求供粉").c_str(), &m_ShowAssist.m_RequestDropPowder)) {
//		if (m_ShowAssist.m_RequestDropPowder) RequestSupplyStart();
//		else RequestSupplyStop();
//	}
//
//	ImGui::PushItemFlag(ImGuiItemFlags_Disabled, true);
//	m_ShowAssist.m_DropPowderEnable = powderSupplyStat.m_DropPowderEnable;
//	ImGui::Checkbox(_(u8"允许供粉").c_str(), &m_ShowAssist.m_DropPowderEnable);
//	ImGui::PopItemFlag();
//
//	m_ShowAssist.m_OpenDropPowderValve = powderSupplyStat.m_OpenDropPowderValve;
//	if (ImGui::Checkbox(_(u8"开启下粉阀").c_str(), &m_ShowAssist.m_OpenDropPowderValve)) {
//		SetOpenDropPowderValve(m_ShowAssist.m_OpenDropPowderValve);
//	}
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	m_ShowAssist.m_DeoxygenActive = powderSupplyStat.m_DeoxygenActive;
//	if (ImGui::Checkbox(_(u8"送粉机除氧").c_str(), &m_ShowAssist.m_DeoxygenActive)) {
//		SetDeoxygenActive(m_ShowAssist.m_DeoxygenActive);
//	}
//
//	m_ShowAssist.m_RequestSupplyPowder = powderSupplyStat.m_RequestSupplyPowder;
//	if (ImGui::Checkbox(_(u8"启动送粉").c_str(), &m_ShowAssist.m_RequestSupplyPowder)) {
//		SetSupplyEnable(m_ShowAssist.m_RequestSupplyPowder);
//	}
//
//	m_ShowAssist.m_PcCtrlSupply = powderSupplyStat.m_PcCtrlSupply;
//	if (ImGui::Checkbox(_(u8"PC控制送粉").c_str(), &m_ShowAssist.m_PcCtrlSupply)) {
//		SetPCCtrlSupply(m_ShowAssist.m_PcCtrlSupply);
//	}
//
//	m_ShowAssist.m_ReactiveMetals = powderSupplyStat.m_ReactiveMetals;
//	if (ImGui::Checkbox(_(u8"活性金属").c_str(), &m_ShowAssist.m_ReactiveMetals)) {
//		SetReactiveMetals(m_ShowAssist.m_ReactiveMetals);
//	}
//
//	m_ShowAssist.m_EnableHammer = powderSupplyStat.m_EnableHammer;
//	if (ImGui::Checkbox(_(u8"启动气锤").c_str(), &m_ShowAssist.m_EnableHammer)) {
//		SetStartHammer(!m_ShowAssist.m_EnableHammer);
//	}
//
//	m_ShowAssist.m_EnableNewPowderDorpFreq = powderSupplyStat.m_EnableNewPowderDorpFreq;
//	if (ImGui::Checkbox(_(u8"启用新粉下粉阀频率").c_str(), &m_ShowAssist.m_EnableNewPowderDorpFreq)) {
//		SetStartNewPowderDorpFreq(m_ShowAssist.m_EnableNewPowderDorpFreq);
//	}
//
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//	ImGui::PushItemWidth(120);
//	m_ShowAssist.m_MachineOxygenTarge = powderSupplyStat.m_MachineOxygenTarge;
//	if (ImGui::InputFloat(_(u8"送粉机除氧目标值").c_str(), &m_ShowAssist.m_MachineOxygenTarge, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineDeoxygenTarge(m_ShowAssist.m_MachineOxygenTarge);
//	}
//
//	m_ShowAssist.m_MachineOxygenAlarm = powderSupplyStat.m_MachineOxygenAlarm;
//	if (ImGui::InputFloat(_(u8"送粉机氧报警值").c_str(), &m_ShowAssist.m_MachineOxygenAlarm, 0.0f, 0.0f, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineOxygenAlarm(m_ShowAssist.m_MachineOxygenAlarm);
//	}
//
//	m_ShowAssist.m_MachineOxygenRealtime = powderSupplyStat.m_MachineOxygenRealtime;
//	ImGui::InputFloat(_(u8"送粉机氧含量").c_str(), &m_ShowAssist.m_MachineOxygenRealtime, 0.0f, 0.0f, "%.2f", ImGuiInputTextFlags_ReadOnly);
//
//	m_ShowAssist.m_PowderValveOpenTime = powderSupplyStat.m_PowderValveOpenTime;
//	if (ImGui::InputFloat(_(u8"下粉阀打开时间(s)").c_str(), &m_ShowAssist.m_PowderValveOpenTime, 0.0f, 0.0f, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPowderValveOpenTime(m_ShowAssist.m_PowderValveOpenTime * 10);
//	}
//
//	m_ShowAssist.m_PowderValveCloseTime = powderSupplyStat.m_PowderValveCloseTime;
//	if (ImGui::InputFloat(_(u8"下粉阀关闭时间(s)").c_str(), &m_ShowAssist.m_PowderValveCloseTime, 0.0f, 0.0f, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPowderValveCloseTime(m_ShowAssist.m_PowderValveCloseTime * 10);
//	}
//
//	m_ShowAssist.m_AirHammerOpenTime = powderSupplyStat.m_AirHammerOpenTime;
//	if (ImGui::InputFloat(_(u8"气锤打开时间(s)").c_str(), &m_ShowAssist.m_AirHammerOpenTime, 0.0f, 0.0f, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetAirHammerOpenTime(m_ShowAssist.m_AirHammerOpenTime * 10);
//	}
//
//	m_ShowAssist.m_AirHammerCloseTime = powderSupplyStat.m_AirHammerCloseTime;
//	if (ImGui::InputFloat(_(u8"气锤关闭时间(s)").c_str(), &m_ShowAssist.m_AirHammerCloseTime, 0.0f, 0.0f, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetAirHammerCloseTime(m_ShowAssist.m_AirHammerCloseTime * 10);
//	}
//
//	m_ShowAssist.m_SupplyBlockStopMinute = powderSupplyStat.m_SupplyBlockStopMinute;
//	if (ImGui::InputScalar(_(u8"送粉堵塞停止时间(min)").c_str(), ImGuiDataType_U16, &m_ShowAssist.m_SupplyBlockStopMinute, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyBlockStopMinute(m_ShowAssist.m_SupplyBlockStopMinute);
//	}
//
//	m_ShowAssist.m_FanWorkTiming = powderSupplyStat.m_FanWorkTiming;
//	if (ImGui::InputScalar(_(u8"运行风机计时(min)").c_str(), ImGuiDataType_U8, &m_ShowAssist.m_FanWorkTiming, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFanWorkTiming(m_ShowAssist.m_FanWorkTiming);
//	}
//
//	m_ShowAssist.m_FanWorkStopTime = powderSupplyStat.m_FanWorkStopTime;
//	if (ImGui::InputScalar(_(u8"风机运行停机时间(min)").c_str(), ImGuiDataType_U8, &m_ShowAssist.m_FanWorkStopTime, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFanWorkStopTime(m_ShowAssist.m_FanWorkStopTime);
//	}
//
//
//	m_ShowAssist.m_FanCoolTime = powderSupplyStat.m_FanCoolTime;
//	if (ImGui::InputScalar(_(u8"强制风机冷却时间(min)").c_str(), ImGuiDataType_U8, &m_ShowAssist.m_FanCoolTime, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFanCoolTime(m_ShowAssist.m_FanCoolTime);
//	}
//	ImGui::PopItemWidth();
//
//
//	//ImGui::Text(_(u8"风机运行停机时间(min)").c_str(), powderSupplyStat.m_FanWorkStopTime);
//
//	ImGui::Dummy(ImVec2(0, 10));
//	ImGui::PushItemWidth(130);
//
//	if (m_ExtCfg->m_UsePowderStick) {
//		if (ImGui::InputFloat(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StartSupplyQty < 0.0f)m_PowderEstimateCfg->m_StartSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StartSupplyQty = m_PowderEstimateCfg->m_StopSupplyQty;
//		}
//		if (ImGui::InputFloat(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StopSupplyQty < 0.0f)m_PowderEstimateCfg->m_StopSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StopSupplyQty = m_PowderEstimateCfg->m_StartSupplyQty;
//		}
//	}
//	else {
//		char buffer[512];
//		int bufferoffset = 0;
//		for (size_t i = 0; i < m_PowderEstimateCfg->m_PEVec.size(); i++) {
//			bufferoffset += sprintf_s(buffer + bufferoffset, sizeof(buffer) - bufferoffset, "%s", m_PowderEstimateCfg->m_PEVec[i]->m_PosSensor->m_ShowContent.c_str());
//			bufferoffset += 1;
//		}
//		string str(buffer, bufferoffset);
//		if (ImGui::Combo(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StartSupplyPos = m_PowderEstimateCfg->m_StopSupplyPos - 1;
//		}
//		if (ImGui::Combo(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StopSupplyPos = m_PowderEstimateCfg->m_StartSupplyPos + 1;
//		}
//	}
//	ImGui::PopItemWidth();
//	ImGui::EndGroup();
//
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//	ImGui::Text(_(u8"送粉堵塞报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉滤芯堵塞报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyFilterBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"加粉罐挂粉报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarHangUpPowderAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"氧含量越限报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_OxygenOverLimitAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"除氧功能启动失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_DeoxygenStartupFailed) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉功能启动失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyPowderStartupFailed) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"测氧仪离线报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_OxygenDetectorOfflineAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"冷却风机强制运行报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanForceRunAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	ImGui::Text(_(u8"压差模拟量：%.2f").c_str(), g_SystemInfo->m_EnvState.m_PowderJarCabinPressureVoltage);
//
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::Spacing();
//
//	ImGui::End();
//}


//void PowderSupplySimpleClient2::InitCommand()
//{
//	S7Command* pcommand = new S7Command(S7_COMMAND_READ_INFO, READ_ITEM_COUNT);
//	TS7DataItem* items = pcommand->getDataItems();
//
//	items[0].Area = S7AreaDB;
//	items[0].WordLen = S7WLByte;
//	items[0].DBNumber = 1;
//	items[0].Start = 0;
//	items[0].Amount = 4;
//	items[0].pdata = new unsigned char[4];
//
//	items[1].Area = S7AreaDB;
//	items[1].WordLen = S7WLByte;
//	items[1].DBNumber = 1;
//	items[1].Start = 105;
//	items[1].Amount = 1;
//	items[1].pdata = new unsigned char[1];
//
//	items[2].Area = S7AreaDB;
//	items[2].WordLen = S7WLByte;
//	items[2].DBNumber = 1;
//	items[2].Start = 200;
//	items[2].Amount = 76;
//	items[2].pdata = new unsigned char[76];
//
//	items[3].Area = S7AreaDB;
//	items[3].WordLen = S7WLByte;
//	items[3].DBNumber = 1;
//	items[3].Start = 316;
//	items[3].Amount = 19;
//	items[3].pdata = new unsigned char[19];
//
//	pcommand->m_Ref = this;
//	pcommand->m_Fun = &PowderSupplySimpleClient2::ProcReadInfo;
//	pcommand->isNeedDel = false;
//
//	//写压力
//	S7Command* pressureCom = new S7Command(S7_COMMAND_WRITE, 1);
//	TS7DataItem* dataItem = pressureCom->getDataItems();
//	dataItem[0].Area = S7AreaDB;
//	dataItem[0].DBNumber = 1;
//	dataItem[0].Start = 226;
//	dataItem[0].WordLen = S7WLByte;
//	dataItem[0].Amount = 4;
//	unsigned char* pfloat = new unsigned char[4];
//	S7FLOATDATA fdata;
//	fdata.fValue = g_SystemInfo->m_EnvState.m_PowderJarCabinPressureVoltage;	 //ad4 压差
//	pfloat[0] = fdata.data[3];
//	pfloat[1] = fdata.data[2];
//	pfloat[2] = fdata.data[1];
//	pfloat[3] = fdata.data[0];
//	dataItem[0].pdata = pfloat;
//	//m_PressureWriteValue = (unsigned char*)dataItem[0].pdata;
//	m_PressureWriteValue->SetValue((char*)pfloat);
//
//	pressureCom->m_Ref = this;
//	//pressureCom->m_Fun = &PowderSupplySimpleClient::ProcWriteValueXT;
//	pressureCom->isNeedDel = false;
//	pressureCom->m_PreWrite = &PowderSupplySimpleClient::ProcSetPressureValue;
//
//	m_CycleCommands.push_back(pcommand);
//	m_CycleCommands.push_back(pressureCom);
//}
//
//void PowderSupplySimpleClient2::ProcReadInfo(void *pobject, Command* pcommand)
//{
//	S7Command* s7Command = (S7Command*)pcommand;
//	TS7DataItem* pdataItems = s7Command->getDataItems();
//	unsigned int itemcount = s7Command->getItemCount();
//	if (pobject == NULL || itemcount != READ_ITEM_COUNT)return;
//	PowderSupplySimpleClient2* ppw = (PowderSupplySimpleClient2*)pobject;
//
//	TS7DataItem pReq = pdataItems[0];
//	TS7DataItem pNet = pdataItems[1];
//	TS7DataItem pCtrl = pdataItems[2];
//	TS7DataItem pTime = pdataItems[3];
//
//	EnterCriticalSection(&ppw->m_ValueCS);
//	if (pReq.Result == 0) {
//		unsigned char* data = (unsigned char*)pReq.pdata;
//		ppw->m_ClientState.m_RequestDropPowder->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_DropPowderEnable->SetValue(((data[0] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_OpenDropPowderValve->SetValue(((data[0] & 04) > 0 ? true : false));
//
//		ppw->m_ClientState.m_SupplyBlockAlarm->SetValue(((data[2] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyFilterBlockAlarm->SetValue(((data[2] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyJarHangUpPowderAlarm->SetValue(((data[2] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_OxygenOverLimitAlarm->SetValue(((data[2] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_DeoxygenStartupFailed->SetValue(((data[2] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyPowderStartupFailed->SetValue(((data[2] & 0x20) > 0 ? true : false));
//		ppw->m_ClientState.m_OxygenDetectorOfflineAlarm->SetValue(((data[2] & 0x40) > 0 ? true : false));
//		ppw->m_ClientState.m_FanForceRunAlarm->SetValue(((data[2] & 0x80) > 0 ? true : false));
//		ppw->m_ClientState.m_FanOverHeatAlarm->SetValue(((data[3] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyPowderTempAlarm->SetValue(((data[3] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_NewJarNoPowerAlarm->SetValue(((data[3] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyPowderFilterAlarm->SetValue(((data[3] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_AddPowderJarFullBlowbackAlarm->SetValue(((data[3] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_FanBlowbackAlarm->SetValue(((data[3] & 0x20) > 0 ? true : false));
//
//	}
//	if (pNet.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)pNet.pdata;
//		ppw->m_ClientState.m_DeoxygenActive->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_RequestSupplyPowder->SetValue(((data[0] & 0x2) > 0 ? true : false));
//	}
//	if (pCtrl.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)pCtrl.pdata;
//		S7FLOATDATA machineOxygenTarge;
//		S7FLOATDATA machineOxygenAlarm;
//		S7FLOATDATA machineOxygenRealtime;
//		S7FLOATDATA pressureDif;
//
//		S7FLOATDATA OxygenSensorUpLimit;
//		S7FLOATDATA SupplyPowderPressureDifUpLimit;
//		S7FLOATDATA SupplyPowderPressureDifDownLimit;
//		S7FLOATDATA SupplyPowderPressureDifValue;
//		S7FLOATDATA FilterPressureDifUpLimit;
//		S7FLOATDATA FilterPressureDifDownLimit;
//		S7FLOATDATA FilterPressureDifValue;
//		S7FLOATDATA SupplyPowderBlockPressureValue;
//		S7FLOATDATA FilterBlockPressureValue;
//		S7FLOATDATA SupplyPowderBlockWarnValue;
//
//		//ppw->m_ClientState.m_PcCtrlSupply ->SetValue( ((data[0] & 0x1) > 0 ? true : false);
//		ppw->m_ClientState.m_SupplyPowderDeoxygenEnable->SetValue(((data[0] & 0x2) > 0 ? true : false));
//
//		//	ppw->m_ClientState.m_SupplyBlockAlarm ->SetValue( ((data[0] & 0x4) > 0 ? true : false);
//		//	ppw->m_ClientState.m_SupplyFilterBlockAlarm ->SetValue( ((data[0] & 0x8) > 0 ? true : false);
//		ppw->m_ClientState.m_EnableHammer->SetValue(!((data[0] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_EnableNewPowderDorpFreq->SetValue(((data[0] & 0x20) > 0 ? true : false));
//		ppw->m_ClientState.m_DorpPowderPressureCompensateEnable->SetValue(((data[0] & 0x40) > 0 ? true : false));
//
//		machineOxygenTarge.data[0] = data[7];
//		machineOxygenTarge.data[1] = data[6];
//		machineOxygenTarge.data[2] = data[5];
//		machineOxygenTarge.data[3] = data[4];
//
//		machineOxygenAlarm.data[0] = data[11];
//		machineOxygenAlarm.data[1] = data[10];
//		machineOxygenAlarm.data[2] = data[9];
//		machineOxygenAlarm.data[3] = data[8];
//
//		machineOxygenRealtime.data[0] = data[15];
//		machineOxygenRealtime.data[1] = data[14];
//		machineOxygenRealtime.data[2] = data[13];
//		machineOxygenRealtime.data[3] = data[12];
//
//		ppw->m_ClientState.m_PowderValveOpenTime->SetValue((float)((data[16] & 0xff) << 8) + (data[17] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_PowderValveCloseTime->SetValue((float)((data[18] & 0xff) << 8) + (data[19] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_AirHammerOpenTime->SetValue((float)((data[20] & 0xff) << 8) + (data[21] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_AirHammerCloseTime->SetValue((float)((data[22] & 0xff) << 8) + (data[23] & 0xff) / 10.0f);
//
//		pressureDif.data[0] = data[29];
//		pressureDif.data[1] = data[28];
//		pressureDif.data[2] = data[27];
//		pressureDif.data[3] = data[26];
//
//		ppw->m_ClientState.m_MachineOxygenTarge->SetValue(machineOxygenTarge.fValue);
//		ppw->m_ClientState.m_MachineOxygenAlarm->SetValue(machineOxygenAlarm.fValue);
//		ppw->m_ClientState.m_MachineOxygenRealtime->SetValue(machineOxygenRealtime.fValue);
//		ppw->m_ClientState.m_PressureDif->SetValue(pressureDif.fValue);
//
//		ppw->m_ClientState.m_SupplyBlockStopMinute->SetValue(((data[30] & 0xff) << 8) + (data[31] & 0xff));
//		ppw->m_ClientState.m_BlowbackTimes->SetValue(((data[32] & 0xff) << 8) + (data[33] & 0xff));
//		ppw->m_ClientState.m_BlowbackValveOpenTime->SetValue((float)((data[34] & 0xff) << 8) + (data[35] & 0xff) / 10.0f);
//
//
//		OxygenSensorUpLimit.data[0] = data[39];
//		OxygenSensorUpLimit.data[1] = data[38];
//		OxygenSensorUpLimit.data[2] = data[37];
//		OxygenSensorUpLimit.data[3] = data[36];
//
//		SupplyPowderPressureDifUpLimit.data[0] = data[43];
//		SupplyPowderPressureDifUpLimit.data[1] = data[42];
//		SupplyPowderPressureDifUpLimit.data[2] = data[41];
//		SupplyPowderPressureDifUpLimit.data[3] = data[40];
//
//		SupplyPowderPressureDifDownLimit.data[0] = data[47];
//		SupplyPowderPressureDifDownLimit.data[1] = data[46];
//		SupplyPowderPressureDifDownLimit.data[2] = data[45];
//		SupplyPowderPressureDifDownLimit.data[3] = data[44];
//
//		SupplyPowderPressureDifValue.data[0] = data[51];
//		SupplyPowderPressureDifValue.data[1] = data[50];
//		SupplyPowderPressureDifValue.data[2] = data[49];
//		SupplyPowderPressureDifValue.data[3] = data[48];
//
//		FilterPressureDifUpLimit.data[0] = data[55];
//		FilterPressureDifUpLimit.data[1] = data[54];
//		FilterPressureDifUpLimit.data[2] = data[53];
//		FilterPressureDifUpLimit.data[3] = data[52];
//
//		FilterPressureDifDownLimit.data[0] = data[59];
//		FilterPressureDifDownLimit.data[1] = data[58];
//		FilterPressureDifDownLimit.data[2] = data[57];
//		FilterPressureDifDownLimit.data[3] = data[56];
//
//		FilterPressureDifValue.data[0] = data[63];
//		FilterPressureDifValue.data[1] = data[62];
//		FilterPressureDifValue.data[2] = data[61];
//		FilterPressureDifValue.data[3] = data[60];
//
//		SupplyPowderBlockPressureValue.data[0] = data[67];
//		SupplyPowderBlockPressureValue.data[1] = data[66];
//		SupplyPowderBlockPressureValue.data[2] = data[65];
//		SupplyPowderBlockPressureValue.data[3] = data[64];
//
//		FilterBlockPressureValue.data[0] = data[71];
//		FilterBlockPressureValue.data[1] = data[70];
//		FilterBlockPressureValue.data[2] = data[69];
//		FilterBlockPressureValue.data[3] = data[68];
//
//		SupplyPowderBlockWarnValue.data[0] = data[75];
//		SupplyPowderBlockWarnValue.data[1] = data[74];
//		SupplyPowderBlockWarnValue.data[2] = data[73];
//		SupplyPowderBlockWarnValue.data[3] = data[72];
//
//		ppw->m_ClientState.m_OxygenSensorUpLimit->SetValue(OxygenSensorUpLimit.fValue);
//		ppw->m_ClientState.m_SupplyPowderPressureDifUpLimit->SetValue(SupplyPowderPressureDifUpLimit.fValue);
//		ppw->m_ClientState.m_SupplyPowderPressureDifDownLimit->SetValue(SupplyPowderPressureDifDownLimit.fValue);
//		ppw->m_ClientState.m_SupplyPowderPressureDifValue->SetValue(SupplyPowderPressureDifValue.fValue);
//		ppw->m_ClientState.m_FilterPressureDifUpLimit->SetValue(FilterPressureDifUpLimit.fValue);
//		ppw->m_ClientState.m_FilterPressureDifDownLimit->SetValue(FilterPressureDifDownLimit.fValue);
//		ppw->m_ClientState.m_FilterPressureDifValue->SetValue(FilterPressureDifValue.fValue);
//		ppw->m_ClientState.m_SupplyPowderBlockPressureValue->SetValue(SupplyPowderBlockPressureValue.fValue);
//		ppw->m_ClientState.m_FilterBlockPressureValue->SetValue(FilterBlockPressureValue.fValue);
//		ppw->m_ClientState.m_SupplyPowderBlockWarnValue->SetValue(SupplyPowderBlockWarnValue.fValue);
//	}
//
//	if (pTime.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)pTime.pdata;
//		ppw->m_ClientState.m_PocketAerateTime->SetValue((float)((data[0] & 0xff) << 8) + (data[1] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_WorkFanStopDelayTime->SetValue((float)((data[2] & 0xff) << 8) + (data[3] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_DropPowderValveOpenKeepTime->SetValue((float)((data[4] & 0xff) << 8) + (data[5] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_AddPowderUpLimitSenseTime->SetValue((float)((data[6] & 0xff) << 8) + (data[7] & 0xff) / 10.0f);
//		ppw->m_ClientState.m_Version->SetValue(data[18]);		//版本
//	}
//	LeaveCriticalSection(&ppw->m_ValueCS);
//}

//void PowderSupplySimpleClient2::DrawUI(bool* isshow)
//{
//	PowderSupplySimpleStat powderSupplyStat;
//	GetStat(powderSupplyStat);
//	//ImGui::SetNextWindowSize(ImVec2(780, 420));
//	ImGui::Begin(_(u8"供粉状态").c_str(), isshow, ImGuiWindowFlags_NoDocking | ImGuiWindowFlags_NoNav | ImGuiWindowFlags_AlwaysAutoResize);
//	ImGui::BeginGroup();
//
//	if (IsServerConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉端口连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉端口连接：断开").c_str());
//	if (IsSignalConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉通讯连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉通讯连接：断开").c_str());
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	ImGui::Checkbox(_(u8"打印自动送粉").c_str(), &m_PowderEstimateCfg->m_AutoSupplyEnable);
//	ImGui::Text(_(u8"自动送粉状态：%s").c_str(), IsAutoSuppling() ? _(u8"启动").c_str() : _(u8"停止").c_str());
//	if (IsAutoSuppling()) {
//		if (ImGui::Button(_(u8"中断自动送粉").c_str(), ImVec2(150, 0))) {
//			StopAutoSupply();
//		}
//	}
//
//	ImGui::Text(_(u8"自动送粉超时分钟：").c_str()); ImGui::SameLine();
//	ImGui::PushID("AutoSupplyTimeoutMinute");
//	ImGui::PushItemWidth(40);
//	ImGui::InputScalar("", ImGuiDataType_U32, &m_PowderEstimateCfg->m_AutoSupplyTimeoutMinute, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue);
//	ImGui::PopItemWidth();
//	ImGui::PopID();
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	m_ShowAssist.m_RequestDropPowder = powderSupplyStat.m_RequestDropPowder;
//	if (ImGui::Checkbox(_(u8"请求供粉").c_str(), &m_ShowAssist.m_RequestDropPowder)) {
//		if (m_ShowAssist.m_RequestDropPowder) RequestSupplyStart();
//		else RequestSupplyStop();
//	}
//
//	ImGui::PushItemFlag(ImGuiItemFlags_Disabled, true);
//	m_ShowAssist.m_DropPowderEnable = powderSupplyStat.m_DropPowderEnable;
//	ImGui::Checkbox(_(u8"允许供粉").c_str(), &m_ShowAssist.m_DropPowderEnable);
//	ImGui::PopItemFlag();
//
//	m_ShowAssist.m_OpenDropPowderValve = powderSupplyStat.m_OpenDropPowderValve;
//	if (ImGui::Checkbox(_(u8"开启下粉阀").c_str(), &m_ShowAssist.m_OpenDropPowderValve)) {
//		SetOpenDropPowderValve(m_ShowAssist.m_OpenDropPowderValve);
//	}
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	m_ShowAssist.m_DeoxygenActive = powderSupplyStat.m_DeoxygenActive;
//	if (ImGui::Checkbox(_(u8"送粉机除氧").c_str(), &m_ShowAssist.m_DeoxygenActive)) {
//		SetDeoxygenActive(m_ShowAssist.m_DeoxygenActive);
//	}
//
//	m_ShowAssist.m_RequestSupplyPowder = powderSupplyStat.m_RequestSupplyPowder;
//	if (ImGui::Checkbox(_(u8"启动送粉").c_str(), &m_ShowAssist.m_RequestSupplyPowder)) {
//		SetSupplyEnable(m_ShowAssist.m_RequestSupplyPowder);
//	}
//
//	m_ShowAssist.m_EnableHammer = powderSupplyStat.m_EnableHammer;
//	if (ImGui::Checkbox(_(u8"启动气锤").c_str(), &m_ShowAssist.m_EnableHammer)) {
//		SetStartHammer(!m_ShowAssist.m_EnableHammer);
//	}
//
//	m_ShowAssist.m_EnableNewPowderDorpFreq = powderSupplyStat.m_EnableNewPowderDorpFreq;
//	if (ImGui::Checkbox(_(u8"启用新粉下粉阀频率").c_str(), &m_ShowAssist.m_EnableNewPowderDorpFreq)) {
//		SetStartNewPowderDorpFreq(m_ShowAssist.m_EnableNewPowderDorpFreq);
//	}
//
//	m_ShowAssist.m_DorpPowderPressureCompensateEnable = powderSupplyStat.m_DorpPowderPressureCompensateEnable;
//	if (ImGui::Checkbox(_(u8"启用下粉补压").c_str(), &m_ShowAssist.m_DorpPowderPressureCompensateEnable)) {
//		SetStartDorpPowderPressureCompensateEnable(m_ShowAssist.m_DorpPowderPressureCompensateEnable);
//	}
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//	ImGui::PushItemWidth(100);
//	m_ShowAssist.m_MachineOxygenTarge = powderSupplyStat.m_MachineOxygenTarge;
//	if (ImGui::InputFloat(_(u8"送粉机除氧目标值").c_str(), &m_ShowAssist.m_MachineOxygenTarge, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineDeoxygenTarge(m_ShowAssist.m_MachineOxygenTarge);
//	}
//
//	m_ShowAssist.m_MachineOxygenAlarm = powderSupplyStat.m_MachineOxygenAlarm;
//	if (ImGui::InputFloat(_(u8"送粉机氧报警值").c_str(), &m_ShowAssist.m_MachineOxygenAlarm, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineOxygenAlarm(m_ShowAssist.m_MachineOxygenAlarm);
//	}
//
//	m_ShowAssist.m_MachineOxygenRealtime = powderSupplyStat.m_MachineOxygenRealtime;
//	ImGui::InputFloat(_(u8"送粉机氧含量").c_str(), &m_ShowAssist.m_MachineOxygenRealtime, 0, 0, "%.2f", ImGuiInputTextFlags_ReadOnly);
//
//	m_ShowAssist.m_OxygenSensorUpLimit = powderSupplyStat.m_OxygenSensorUpLimit;
//	if (ImGui::InputFloat(_(u8"送粉机测氧仪上限(%)").c_str(), &m_ShowAssist.m_OxygenSensorUpLimit, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetOxygenSensorUpLimit(m_ShowAssist.m_OxygenSensorUpLimit);
//	}
//
//	m_ShowAssist.m_SupplyPowderPressureDifUpLimit = powderSupplyStat.m_SupplyPowderPressureDifUpLimit;
//	if (ImGui::InputFloat(_(u8"送粉压差上限(kpa)").c_str(), &m_ShowAssist.m_SupplyPowderPressureDifUpLimit, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyPowderPressureDifUpLimit(m_ShowAssist.m_SupplyPowderPressureDifUpLimit);
//	}
//
//	m_ShowAssist.m_SupplyPowderPressureDifDownLimit = powderSupplyStat.m_SupplyPowderPressureDifDownLimit;
//	if (ImGui::InputFloat(_(u8"送粉压差下限(kpa)").c_str(), &m_ShowAssist.m_SupplyPowderPressureDifDownLimit, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyPowderPressureDifDownLimit(m_ShowAssist.m_SupplyPowderPressureDifDownLimit);
//	}
//
//	m_ShowAssist.m_SupplyPowderPressureDifValue = powderSupplyStat.m_SupplyPowderPressureDifValue;
//	ImGui::InputFloat(_(u8"送粉压差实际值(kpa)").c_str(), &m_ShowAssist.m_SupplyPowderPressureDifValue, 0, 0, "%.2f", ImGuiInputTextFlags_ReadOnly);
//
//	ImGui::PopItemWidth();
//
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//
//	ImGui::PushItemWidth(100);
//	m_ShowAssist.m_FilterPressureDifUpLimit = powderSupplyStat.m_FilterPressureDifUpLimit;
//	if (ImGui::InputFloat(_(u8"滤芯压差上限(kpa)").c_str(), &m_ShowAssist.m_FilterPressureDifUpLimit, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFilterPressureDifUpLimit(m_ShowAssist.m_FilterPressureDifUpLimit);
//	}
//
//	m_ShowAssist.m_FilterPressureDifDownLimit = powderSupplyStat.m_FilterPressureDifDownLimit;
//	if (ImGui::InputFloat(_(u8"滤芯压差下限(kpa)").c_str(), &m_ShowAssist.m_FilterPressureDifDownLimit, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFilterPressureDifDownLimit(m_ShowAssist.m_FilterPressureDifDownLimit);
//	}
//
//	m_ShowAssist.m_FilterPressureDifValue = powderSupplyStat.m_FilterPressureDifValue;
//	ImGui::InputFloat(_(u8"滤压差实际值(kpa)").c_str(), &m_ShowAssist.m_FilterPressureDifValue, 0, 0, "%.2f", ImGuiInputTextFlags_ReadOnly);
//
//	m_ShowAssist.m_SupplyPowderBlockPressureValue = powderSupplyStat.m_SupplyPowderBlockPressureValue;
//	if (ImGui::InputFloat(_(u8"送粉堵塞压力值(kpa)").c_str(), &m_ShowAssist.m_SupplyPowderBlockPressureValue, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyPowderBlockPressureValue(m_ShowAssist.m_SupplyPowderBlockPressureValue);
//	}
//
//	m_ShowAssist.m_FilterBlockPressureValue = powderSupplyStat.m_FilterBlockPressureValue;
//	if (ImGui::InputFloat(_(u8"滤芯堵塞压力值(kpa)").c_str(), &m_ShowAssist.m_FilterBlockPressureValue, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetFilterBlockPressureValue(m_ShowAssist.m_FilterBlockPressureValue);
//	}
//
//	m_ShowAssist.m_SupplyPowderBlockWarnValue = powderSupplyStat.m_SupplyPowderBlockWarnValue;
//	if (ImGui::InputFloat(_(u8"送粉堵塞预警值(kpa)").c_str(), &m_ShowAssist.m_SupplyPowderBlockWarnValue, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyPowderBlockWarnValue(m_ShowAssist.m_SupplyPowderBlockWarnValue);
//	}
//
//	m_ShowAssist.m_PowderValveOpenTime = powderSupplyStat.m_PowderValveOpenTime;
//	if (ImGui::InputFloat(_(u8"下粉阀打开时间(s)").c_str(), &m_ShowAssist.m_PowderValveOpenTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPowderValveOpenTime(m_ShowAssist.m_PowderValveOpenTime * 10);
//	}
//
//	m_ShowAssist.m_PowderValveCloseTime = powderSupplyStat.m_PowderValveCloseTime;
//	if (ImGui::InputFloat(_(u8"下粉阀关闭时间(s)").c_str(), &m_ShowAssist.m_PowderValveCloseTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPowderValveCloseTime(m_ShowAssist.m_PowderValveCloseTime * 10);
//	}
//
//	m_ShowAssist.m_AirHammerOpenTime = powderSupplyStat.m_AirHammerOpenTime;
//	if (ImGui::InputFloat(_(u8"气锤打开时间(s)").c_str(), &m_ShowAssist.m_AirHammerOpenTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetAirHammerOpenTime(m_ShowAssist.m_AirHammerOpenTime * 10);
//	}
//
//	m_ShowAssist.m_AirHammerCloseTime = powderSupplyStat.m_AirHammerCloseTime;
//	if (ImGui::InputFloat(_(u8"气锤关闭时间(s)").c_str(), &m_ShowAssist.m_AirHammerCloseTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetAirHammerCloseTime(m_ShowAssist.m_AirHammerCloseTime * 10);
//	}
//
//	m_ShowAssist.m_SupplyBlockStopMinute = powderSupplyStat.m_SupplyBlockStopMinute;
//	if (ImGui::InputScalar(_(u8"送粉堵塞停止时间(min)").c_str(), ImGuiDataType_U16, &m_ShowAssist.m_SupplyBlockStopMinute, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyBlockStopMinute(m_ShowAssist.m_SupplyBlockStopMinute);
//	}
//
//	m_ShowAssist.m_BlowbackTimes = powderSupplyStat.m_BlowbackTimes;
//	if (ImGui::InputScalar(_(u8"反吹次数").c_str(), ImGuiDataType_U16, &m_ShowAssist.m_BlowbackTimes, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetBlowbackTimes(m_ShowAssist.m_BlowbackTimes);
//	}
//
//	m_ShowAssist.m_BlowbackValveOpenTime = powderSupplyStat.m_BlowbackValveOpenTime;
//	if (ImGui::InputFloat(_(u8"反吹阀打开时间(s)").c_str(), &m_ShowAssist.m_BlowbackValveOpenTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetBlowbackValveOpenTime(m_ShowAssist.m_BlowbackValveOpenTime * 10);
//	}
//
//	m_ShowAssist.m_PocketAerateTime = powderSupplyStat.m_PocketAerateTime;
//	if (ImGui::InputFloat(_(u8"气包充气时间(s)").c_str(), &m_ShowAssist.m_PocketAerateTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPocketAerateTime(m_ShowAssist.m_PocketAerateTime * 10);
//	}
//
//	m_ShowAssist.m_WorkFanStopDelayTime = powderSupplyStat.m_WorkFanStopDelayTime;
//	if (ImGui::InputFloat(_(u8"运行风机停止延时(s)").c_str(), &m_ShowAssist.m_WorkFanStopDelayTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetWorkFanStopDelayTime(m_ShowAssist.m_WorkFanStopDelayTime * 10);
//	}
//
//	m_ShowAssist.m_DropPowderValveOpenKeepTime = powderSupplyStat.m_DropPowderValveOpenKeepTime;
//	if (ImGui::InputFloat(_(u8"加粉下粉阀打开保持时间(s)").c_str(), &m_ShowAssist.m_DropPowderValveOpenKeepTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetDropPowderValveOpenKeepTime(m_ShowAssist.m_DropPowderValveOpenKeepTime * 10);
//	}
//
//	m_ShowAssist.m_AddPowderUpLimitSenseTime = powderSupplyStat.m_AddPowderUpLimitSenseTime;
//	if (ImGui::InputFloat(_(u8"加粉上限感应时间(s)").c_str(), &m_ShowAssist.m_AddPowderUpLimitSenseTime, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetAddPowderUpLimitSenseTime(m_ShowAssist.m_AddPowderUpLimitSenseTime * 10);
//	}
//
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//	if (m_ExtCfg->m_UsePowderStick) {
//		if (ImGui::InputFloat(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StartSupplyQty < 0.0f)m_PowderEstimateCfg->m_StartSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StartSupplyQty = m_PowderEstimateCfg->m_StopSupplyQty;
//		}
//		if (ImGui::InputFloat(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StopSupplyQty < 0.0f)m_PowderEstimateCfg->m_StopSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StopSupplyQty = m_PowderEstimateCfg->m_StartSupplyQty;
//		}
//	}
//	else {
//		char buffer[512];
//		int bufferoffset = 0;
//		for (size_t i = 0; i < m_PowderEstimateCfg->m_PEVec.size(); i++) {
//			bufferoffset += sprintf_s(buffer + bufferoffset, sizeof(buffer) - bufferoffset, "%s", m_PowderEstimateCfg->m_PEVec[i]->m_PosSensor->m_Content.c_str());
//			bufferoffset += 1;
//		}
//		string str(buffer, bufferoffset);
//		if (ImGui::Combo(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StartSupplyPos = m_PowderEstimateCfg->m_StopSupplyPos - 1;
//		}
//		if (ImGui::Combo(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StopSupplyPos = m_PowderEstimateCfg->m_StartSupplyPos + 1;
//		}
//	}
//	ImGui::PopItemWidth();
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//
//
//	ImGui::Text(_(u8"送粉堵塞报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉滤芯堵塞报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyFilterBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"加粉罐挂粉报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarHangUpPowderAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"氧含量越限报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_OxygenOverLimitAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"除氧功能启动失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_DeoxygenStartupFailed) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉功能启动失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyPowderStartupFailed) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"测氧仪离线报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_OxygenDetectorOfflineAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"冷却风机强制运行报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanForceRunAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"风机过热报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanOverHeatAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉温度报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyPowderTempAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"新粉罐无粉报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_NewJarNoPowerAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉滤芯报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyPowderFilterAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"粉罐满粉无法反吹报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_AddPowderJarFullBlowbackAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"风机反吹报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanBlowbackAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//	ImGui::Text(_(u8"压差模拟量：%.2f").c_str(), g_SystemInfo->m_EnvState.m_PowderJarCabinPressureVoltage);
//	ImGui::Text(_(u8"版本：%d").c_str(), powderSupplyStat.m_Version);
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::Spacing();
//	ImGui::End();
//}


//void PowderSupplySimpleClient2::SetStartDorpPowderPressureCompensateEnable(bool enable)
//{
//	SetBit(200 * 8 + 6, enable);
//}
//
//void PowderSupplySimpleClient2::SetOxygenSensorUpLimit(float fvalue)
//{
//	SetDBFloat(236, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetSupplyPowderPressureDifUpLimit(float fvalue) {
//	SetDBFloat(240, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetSupplyPowderPressureDifDownLimit(float fvalue) {
//	SetDBFloat(244, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetFilterPressureDifUpLimit(float fvalue) {
//	SetDBFloat(252, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetFilterPressureDifDownLimit(float fvalue) {
//	SetDBFloat(256, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetSupplyPowderBlockPressureValue(float fvalue) {
//	SetDBFloat(264, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetFilterBlockPressureValue(float fvalue) {
//	SetDBFloat(268, fvalue);
//}
//
//void PowderSupplySimpleClient2::SetSupplyPowderBlockWarnValue(float fvalue) {
//	SetDBFloat(272, fvalue);
//}
//
//
//void PowderSupplySimpleClient2::SetBlowbackTimes(unsigned short svalue) {
//	SetDBWord(232, svalue);
//}
//void PowderSupplySimpleClient2::SetBlowbackValveOpenTime(unsigned short svalue) {
//	SetDBWord(234, svalue);
//}
//void PowderSupplySimpleClient2::SetPocketAerateTime(unsigned short svalue) {
//	SetDBWord(316, svalue);
//}
//void PowderSupplySimpleClient2::SetWorkFanStopDelayTime(unsigned short svalue) {
//	SetDBWord(318, svalue);
//}
//void PowderSupplySimpleClient2::SetDropPowderValveOpenKeepTime(unsigned short svalue) {
//	SetDBWord(320, svalue);
//}
//void PowderSupplySimpleClient2::SetAddPowderUpLimitSenseTime(unsigned short svalue) {
//	SetDBWord(322, svalue);
//}


//void PowderSupplySimpleClient3::InitCommand()
//{
//	S7Command* pcommand = new S7Command(S7_COMMAND_READ_INFO, READ_ITEM_COUNT);
//	TS7DataItem* items = pcommand->getDataItems();
//
//	items[0].Area = S7AreaDB;
//	items[0].WordLen = S7WLByte;
//	items[0].DBNumber = 1;
//	items[0].Start = 30;
//	items[0].Amount = 24;
//	items[0].pdata = new unsigned char[24];
//
//	items[1].Area = S7AreaDB;
//	items[1].WordLen = S7WLByte;
//	items[1].DBNumber = 1;
//	items[1].Start = 82;
//	items[1].Amount = 4;
//	items[1].pdata = new unsigned char[4];
//
//	items[2].Area = S7AreaDB;
//	items[2].WordLen = S7WLByte;
//	items[2].DBNumber = 1;
//	items[2].Start = 116;
//	items[2].Amount = 8;
//	items[2].pdata = new unsigned char[8];
//
//	items[3].Area = S7AreaDB;
//	items[3].WordLen = S7WLByte;
//	items[3].DBNumber = 1;
//	items[3].Start = 136;
//	items[3].Amount = 4;
//	items[3].pdata = new unsigned char[4];
//
//	items[4].Area = S7AreaDB;
//	items[4].WordLen = S7WLByte;
//	items[4].DBNumber = 1;
//	items[4].Start = 201;
//	items[4].Amount = 35;
//	items[4].pdata = new unsigned char[35];
//
//	items[5].Area = S7AreaDB;
//	items[5].WordLen = S7WLByte;
//	items[5].DBNumber = 1;
//	items[5].Start = 397;
//	items[5].Amount = 2;
//	items[5].pdata = new unsigned char[2];
//
//	pcommand->m_Ref = this;
//	pcommand->m_Fun = &PowderSupplySimpleClient3::ProcReadInfo;
//	pcommand->isNeedDel = false;
//
//	m_CycleCommands.push_back(pcommand);
//}
//
//void PowderSupplySimpleClient3::ProcReadInfo(void *pobject, Command* pcommand)
//{
//	S7Command* s7Command = (S7Command*)pcommand;
//	TS7DataItem* pdataItems = s7Command->getDataItems();
//	unsigned int itemcount = s7Command->getItemCount();
//	if (pobject == NULL || itemcount != READ_ITEM_COUNT)return;
//	PowderSupplySimpleClient3* ppw = (PowderSupplySimpleClient3*)pobject;
//
//	TS7DataItem sec0 = pdataItems[0];
//	TS7DataItem sec1 = pdataItems[1];
//	TS7DataItem sec2 = pdataItems[2];
//	TS7DataItem sec3 = pdataItems[3];
//	TS7DataItem sec4 = pdataItems[4];
//	TS7DataItem sec5 = pdataItems[5];
//
//	EnterCriticalSection(&ppw->m_ValueCS);
//	if (sec0.Result == 0) {
//		unsigned char* data = (unsigned char*)sec0.pdata;
//		ppw->m_ClientState.m_SupplyBlockPreProcValue->SetValue(FLOATDATA(false, &data[0]).fValue);
//		ppw->m_ClientState.m_MachineOxygenTarge->SetValue(FLOATDATA(false, &data[4]).fValue);
//		ppw->m_ClientState.m_MachineOxygenAlarm->SetValue(FLOATDATA(false, &data[8]).fValue);
//		ppw->m_ClientState.m_PowerCarNoPowderValue->SetValue(FLOATDATA(false, &data[12]).fValue);
//		ppw->m_ClientState.m_SupplyReleasePressureValue->SetValue(FLOATDATA(false, &data[16]).fValue);
//		ppw->m_ClientState.m_SupplyStopReleasePressureValue->SetValue(FLOATDATA(false, &data[20]).fValue);
//		
//		
//	}
//
//	if (sec1.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)sec1.pdata;
//		ppw->m_ClientState.m_InverterFreqSetValue->SetValue(FLOATDATA(false, &data[0]).fValue);
//	}
//
//	if (sec2.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)sec2.pdata;
//		ppw->m_ClientState.m_DropPowderNeedDeoxygenValue->SetValue(FLOATDATA(false, &data[0]).fValue);
//		ppw->m_ClientState.m_DropPowderDeoxygenTargetValue->SetValue(FLOATDATA(false, &data[4]).fValue);
//	}
//
//	if (sec3.Result == 0)
//	{
//		unsigned char* data = (unsigned char*)sec3.pdata;
//		ppw->m_ClientState.m_SupplyDifPressureWarnValue->SetValue(FLOATDATA(false, &data[0]).fValue);
//	}
//
//	if (sec4.Result==0) {
//		unsigned char* data = (unsigned char*)sec4.pdata;
//		ppw->m_ClientState.m_DeoxygenActive->SetValue(((data[0] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_RequestSupplyPowder->SetValue(((data[0] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_BlowbackActive->SetValue(((data[0] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_OpenDropPowderValve->SetValue(((data[0] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_DropPowderEnable->SetValue(((data[0] & 0x10) > 0 ? true : false));
//
//		ppw->m_ClientState.m_SupplyPressure->SetValue(FLOATDATA(false, &data[1]).fValue);
//		ppw->m_ClientState.m_SupplyJarPressure->SetValue(FLOATDATA(false, &data[5]).fValue);
//		ppw->m_ClientState.m_MachineOxygenRealtime->SetValue(FLOATDATA(false, &data[9]).fValue);
//		ppw->m_ClientState.m_PowderCarWeight->SetValue(FLOATDATA(false, &data[13]).fValue);
//		ppw->m_ClientState.m_WorkGasPressure->SetValue(FLOATDATA(false, &data[17]).fValue);
//		ppw->m_ClientState.m_CompressGasPressure->SetValue(FLOATDATA(false, &data[21]).fValue);
//		ppw->m_ClientState.m_SupplyDifPressure->SetValue(FLOATDATA(false, &data[27]).fValue);
//		ppw->m_ClientState.m_DropDifPressure->SetValue(FLOATDATA(false, &data[31]).fValue);
//	}
//
//	if (sec5.Result == 0) {
//		unsigned char* data = (unsigned char*)sec5.pdata;
//		ppw->m_ClientState.m_SupplyJarEnterValveOpenAlarm->SetValue(((data[0] & 0x1) > 0 ? true : false));
//
//		ppw->m_ClientState.m_SupplyJarReturnValveOpenAlarm->SetValue(((data[0] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_ExhaustOpenAlarm->SetValue(((data[0] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_FanRevTurnAlarm->SetValue(((data[0] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_StopButtonPressDown->SetValue(((data[0] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_NoDropPowderWarn->SetValue(((data[0] & 0x20) > 0 ? true : false));
//		ppw->m_ClientState.m_CompressGasPressureLeakAlarm->SetValue(((data[1] & 0x1) > 0 ? true : false));
//		ppw->m_ClientState.m_WorkGasPressureLeakAlarm->SetValue(((data[1] & 0x2) > 0 ? true : false));
//		ppw->m_ClientState.m_NoPowderWarn->SetValue(((data[1] & 0x4) > 0 ? true : false));
//		ppw->m_ClientState.m_InverterAlarm->SetValue(((data[1] & 0x8) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyJarFilterBlockAlarm->SetValue(((data[1] & 0x10) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyBlockAlarm->SetValue(((data[1] & 0x20) > 0 ? true : false));
//		ppw->m_ClientState.m_FanEnterValveOpenAlarm->SetValue(((data[1] & 0x40) > 0 ? true : false));
//		ppw->m_ClientState.m_SupplyJarDropValveCloseAlarm->SetValue(((data[1] & 0x80) > 0 ? true : false));
//	}
//	LeaveCriticalSection(&ppw->m_ValueCS);
//}
//
//void PowderSupplySimpleClient3::SetDeoxygenActive(bool enable)
//{
//	SetBit(201 * 8, enable);
//}
//
//void PowderSupplySimpleClient3::SetSupplyEnable(bool enable)
//{
//	SetBit(201 * 8+1, enable);
//}
//
//void PowderSupplySimpleClient3::SetBlowbackActive(bool enable)
//{
//	SetBit(201 * 8 + 2, enable);
//}
//
//void PowderSupplySimpleClient3::SetOpenDropPowderValve(bool enable)
//{
//	SetBit(201 * 8 + 3, enable);
//}
//
//void PowderSupplySimpleClient3::ResetAlarm()
//{
//	SetBit(201 * 8 + 5,true);
//}
//
//void PowderSupplySimpleClient3::SetSupplyBlockPreProcValue(float fvalue)
//{
//	SetDBFloat(30, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetMachineDeoxygenTarge(float fvalue)
//{
//	SetDBFloat(34, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetMachineOxygenAlarm(float fvalue)
//{
//	SetDBFloat(38, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetPowerCarNoPowderValue(float fvalue)
//{
//	SetDBFloat(42, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetSupplyReleasePressureValue(float fvalue)
//{
//	SetDBFloat(46, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetSupplyStopReleasePressureValue(float fvalue)
//{
//	SetDBFloat(50, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetInverterFreqSetValue(float fvalue)
//{
//	SetDBFloat(82, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetDropPowderNeedDeoxygenValue(float fvalue)
//{
//	SetDBFloat(116, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetDropPowderDeoxygenTargetValue(float fvalue)
//{
//	SetDBFloat(120, fvalue);
//}
//
//void PowderSupplySimpleClient3::SetSupplyDifPressureWarnValue(float fvalue)
//{
//	SetDBFloat(136, fvalue);
//}
//
//void PowderSupplySimpleClient3::RequestStart()
//{
//	if (!m_ClientState.m_RequestSupplyPowder) {
//		SetSupplyEnable(true);
//		Sleep(500);
//	}
//}
//
//void PowderSupplySimpleClient3::RequestSupplyStop()
//{
//	SetSupplyEnable(false);
//}

//void PowderSupplySimpleClient3::DrawUI(bool* isshow)
//{
//	PowderSupplySimpleStat powderSupplyStat;
//	GetStat(powderSupplyStat);
//	//ImGui::SetNextWindowSize(ImVec2(780, 420));
//	ImGui::Begin(_(u8"供粉状态").c_str(), isshow, ImGuiWindowFlags_NoDocking | ImGuiWindowFlags_NoNav | ImGuiWindowFlags_AlwaysAutoResize);
//	ImGui::BeginGroup();
//
//	if (IsServerConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉端口连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉端口连接：断开").c_str());
//	if (IsSignalConnected())ImGui::TextColored(ImVec4(0.0, 1.0, 0.0, 1.0), _(u8"供粉通讯连接：正常").c_str());
//	else ImGui::TextColored(ImVec4(1.0, 0.0, 0.0, 1.0), _(u8"供粉通讯连接：断开").c_str());
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	ImGui::Checkbox(_(u8"打印自动送粉").c_str(), &m_PowderEstimateCfg->m_AutoSupplyEnable);
//	ImGui::Text(_(u8"自动送粉状态：%s").c_str(), IsAutoSuppling() ? _(u8"启动").c_str() : _(u8"停止").c_str());
//	if (IsAutoSuppling()) {
//		if (ImGui::Button(_(u8"中断自动送粉").c_str(), ImVec2(150, 0))) {
//			StopAutoSupply();
//		}
//	}
//
//	ImGui::Text(_(u8"自动送粉超时分钟：").c_str()); ImGui::SameLine();
//	ImGui::PushID("AutoSupplyTimeoutMinute");
//	ImGui::PushItemWidth(40);
//	ImGui::InputScalar("", ImGuiDataType_U32, &m_PowderEstimateCfg->m_AutoSupplyTimeoutMinute, 0, 0, 0, ImGuiInputTextFlags_EnterReturnsTrue);
//	ImGui::PopItemWidth();
//	ImGui::PopID();
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//
//	ImGui::PushItemFlag(ImGuiItemFlags_Disabled, true);
//	m_ShowAssist.m_DropPowderEnable = powderSupplyStat.m_DropPowderEnable;
//	ImGui::Checkbox(_(u8"允许供粉").c_str(), &m_ShowAssist.m_DropPowderEnable);
//	ImGui::PopItemFlag();
//
//	m_ShowAssist.m_DeoxygenActive = powderSupplyStat.m_DeoxygenActive;
//	if (ImGui::Checkbox(_(u8"送粉机除氧").c_str(), &m_ShowAssist.m_DeoxygenActive)) {
//		SetDeoxygenActive(m_ShowAssist.m_DeoxygenActive);
//	}
//
//	m_ShowAssist.m_RequestSupplyPowder = powderSupplyStat.m_RequestSupplyPowder;
//	if (ImGui::Checkbox(_(u8"启动送粉").c_str(), &m_ShowAssist.m_RequestSupplyPowder)) {
//		SetSupplyEnable(m_ShowAssist.m_RequestSupplyPowder);
//	}
//
//	m_ShowAssist.m_BlowbackActive = powderSupplyStat.m_BlowbackActive;
//	if (ImGui::Checkbox(_(u8"反吹启动").c_str(), &m_ShowAssist.m_BlowbackActive)) {
//		SetBlowbackActive(!m_ShowAssist.m_BlowbackActive);
//	}
//
//	m_ShowAssist.m_OpenDropPowderValve = powderSupplyStat.m_OpenDropPowderValve;
//	if (ImGui::Checkbox(_(u8"开启下粉阀").c_str(), &m_ShowAssist.m_OpenDropPowderValve)) {
//		SetOpenDropPowderValve(m_ShowAssist.m_OpenDropPowderValve);
//	}
//
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//	ImGui::Text(_(u8"送粉压力：%.1f KPa").c_str(), powderSupplyStat.m_SupplyPressure);
//	ImGui::Text(_(u8"上加粉罐压力：%.1f KPa").c_str(), powderSupplyStat.m_SupplyJarPressure);
//	ImGui::Text(_(u8"送粉机氧含量：%.1f PPM").c_str(), powderSupplyStat.m_MachineOxygenRealtime);
//	ImGui::Text(_(u8"小车称重：%.1f Kg").c_str(), powderSupplyStat.m_PowderCarWeight);
//	ImGui::Text(_(u8"工作气压力：%.1f MPa").c_str(), powderSupplyStat.m_WorkGasPressure);
//	ImGui::Text(_(u8"压缩气压力：%.1f MPa").c_str(), powderSupplyStat.m_CompressGasPressure);
//	ImGui::Text(_(u8"送粉压差值：%.1f KPa").c_str(), powderSupplyStat.m_SupplyDifPressure);
//	ImGui::Text(_(u8"落粉压差值：%.1f KPa").c_str(), powderSupplyStat.m_DropDifPressure);
//
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//
//	ImGui::PushItemWidth(100);
//
//	m_ShowAssist.m_SupplyBlockPreProcValue = powderSupplyStat.m_SupplyBlockPreProcValue;
//	if (ImGui::InputFloat(_(u8"送粉堵塞预处理KPa").c_str(), &m_ShowAssist.m_SupplyBlockPreProcValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyBlockPreProcValue(m_ShowAssist.m_SupplyBlockPreProcValue);
//	}
//
//	m_ShowAssist.m_MachineOxygenTarge = powderSupplyStat.m_MachineOxygenTarge;
//	if (ImGui::InputFloat(_(u8"送粉机除氧目标值").c_str(), &m_ShowAssist.m_MachineOxygenTarge, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineDeoxygenTarge(m_ShowAssist.m_MachineOxygenTarge);
//	}
//
//	m_ShowAssist.m_MachineOxygenAlarm = powderSupplyStat.m_MachineOxygenAlarm;
//	if (ImGui::InputFloat(_(u8"送粉机氧报警值").c_str(), &m_ShowAssist.m_MachineOxygenAlarm, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetMachineOxygenAlarm(m_ShowAssist.m_MachineOxygenAlarm);
//	}
//
//	m_ShowAssist.m_PowerCarNoPowderValue = powderSupplyStat.m_PowerCarNoPowderValue;
//	if (ImGui::InputFloat(_(u8"小车无粉值").c_str(), &m_ShowAssist.m_PowerCarNoPowderValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetPowerCarNoPowderValue(m_ShowAssist.m_PowerCarNoPowderValue);
//	}
//
//	m_ShowAssist.m_SupplyReleasePressureValue = powderSupplyStat.m_SupplyReleasePressureValue;
//	if (ImGui::InputFloat(_(u8"供粉机泄压值KPA").c_str(), &m_ShowAssist.m_SupplyReleasePressureValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyReleasePressureValue(m_ShowAssist.m_SupplyReleasePressureValue);
//	}
//
//	m_ShowAssist.m_SupplyStopReleasePressureValue = powderSupplyStat.m_SupplyStopReleasePressureValue;
//	if (ImGui::InputFloat(_(u8"供粉机压力停止泄压值").c_str(), &m_ShowAssist.m_SupplyStopReleasePressureValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyStopReleasePressureValue(m_ShowAssist.m_SupplyStopReleasePressureValue);
//	}
//
//	m_ShowAssist.m_InverterFreqSetValue = powderSupplyStat.m_InverterFreqSetValue;
//	if (ImGui::InputFloat(_(u8"变频器频率设定值Hz").c_str(), &m_ShowAssist.m_InverterFreqSetValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetInverterFreqSetValue(m_ShowAssist.m_InverterFreqSetValue);
//	}
//
//	m_ShowAssist.m_DropPowderNeedDeoxygenValue = powderSupplyStat.m_DropPowderNeedDeoxygenValue;
//	if (ImGui::InputFloat(_(u8"下粉时需要除氧值PPM").c_str(), &m_ShowAssist.m_DropPowderNeedDeoxygenValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetDropPowderNeedDeoxygenValue(m_ShowAssist.m_DropPowderNeedDeoxygenValue);
//	}
//
//	m_ShowAssist.m_DropPowderDeoxygenTargetValue = powderSupplyStat.m_DropPowderDeoxygenTargetValue;
//	if (ImGui::InputFloat(_(u8"下粉除氧目标值PPM").c_str(), &m_ShowAssist.m_DropPowderDeoxygenTargetValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetDropPowderDeoxygenTargetValue(m_ShowAssist.m_DropPowderDeoxygenTargetValue);
//	}
//
//	m_ShowAssist.m_SupplyDifPressureWarnValue = powderSupplyStat.m_SupplyDifPressureWarnValue;
//	if (ImGui::InputFloat(_(u8"送粉压差堵塞预警值KPA").c_str(), &m_ShowAssist.m_SupplyDifPressureWarnValue, 0, 0, "%.2f", ImGuiInputTextFlags_EnterReturnsTrue))
//	{
//		SetSupplyDifPressureWarnValue(m_ShowAssist.m_SupplyDifPressureWarnValue);
//	}
//
//	ImGui::Dummy(ImVec2(0.0f, 15.0f));
//	if (m_ExtCfg->m_UsePowderStick) {
//		if (ImGui::InputFloat(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StartSupplyQty < 0.0f)m_PowderEstimateCfg->m_StartSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StartSupplyQty = m_PowderEstimateCfg->m_StopSupplyQty;
//		}
//		if (ImGui::InputFloat(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyQty, 0, 0, "%.1f", ImGuiInputTextFlags_EnterReturnsTrue)) {
//			if (m_PowderEstimateCfg->m_StopSupplyQty < 0.0f)m_PowderEstimateCfg->m_StopSupplyQty = 0.0f;
//			if (m_PowderEstimateCfg->m_StartSupplyQty > m_PowderEstimateCfg->m_StopSupplyQty)m_PowderEstimateCfg->m_StopSupplyQty = m_PowderEstimateCfg->m_StartSupplyQty;
//		}
//	}
//	else {
//		char buffer[512];
//		int bufferoffset = 0;
//		for (size_t i = 0; i < m_PowderEstimateCfg->m_PEVec.size(); i++) {
//			bufferoffset += sprintf_s(buffer + bufferoffset, sizeof(buffer) - bufferoffset, "%s", m_PowderEstimateCfg->m_PEVec[i]->m_PosSensor->m_ShowContent.c_str());
//			bufferoffset += 1;
//		}
//		string str(buffer, bufferoffset);
//		if (ImGui::Combo(_(u8"开始补粉位").c_str(), &m_PowderEstimateCfg->m_StartSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StartSupplyPos = m_PowderEstimateCfg->m_StopSupplyPos - 1;
//		}
//		if (ImGui::Combo(_(u8"结束补粉位").c_str(), &m_PowderEstimateCfg->m_StopSupplyPos, str.data()))
//		{
//			if (m_PowderEstimateCfg->m_StartSupplyPos >= m_PowderEstimateCfg->m_StopSupplyPos)m_PowderEstimateCfg->m_StopSupplyPos = m_PowderEstimateCfg->m_StartSupplyPos + 1;
//		}
//	}
//	ImGui::PopItemWidth();
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::SeparatorEx(ImGuiSeparatorFlags_Vertical);
//	ImGui::SameLine();
//
//	ImGui::BeginGroup();
//
//
//	ImGui::Text(_(u8"上加粉罐进粉阀打开失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarEnterValveOpenAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"上加粉罐回气阀打开失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarReturnValveOpenAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"排气挡板打开失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_ExhaustOpenAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"风机反转报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanRevTurnAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"压缩气压力不足报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_CompressGasPressureLeakAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"工作气压力不足：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_WorkGasPressureLeakAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"无粉警告：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_NoPowderWarn) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"变频器报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_InverterAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"加粉罐滤芯堵塞：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarFilterBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"送粉堵塞报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyBlockAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//
//	ImGui::Text(_(u8"风机进风阀打开失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanEnterValveOpenAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"风机进风阀打开失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_FanEnterValveOpenAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"上加粉罐落粉阀关闭失败报警：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_SupplyJarDropValveCloseAlarm) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"紧急开关已按下：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_StopButtonPressDown) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	ImGui::Text(_(u8"无落粉警告：").c_str()); ImGui::SameLine();
//	if (powderSupplyStat.m_NoDropPowderWarn) {
//		ImGui::TextColored(Toast::COLOR_RED, _(u8"是").c_str());
//	}
//	else ImGui::TextColored(Toast::COLOR_GREEN, _(u8"否").c_str());
//
//	if (ImGui::Button(_(u8"报警复位").c_str()))
//	{
//		ResetAlarm();
//	}
//
//	ImGui::EndGroup();
//	ImGui::SameLine(0, 20);
//	ImGui::Spacing();
//	ImGui::End();
//}