#pragma once
#include "../LanguageManager.h"

class IntelliScanState {

public:
	IntelliScanState() {
		m_GalvanometerScannerTemp = 0.0f;
		m_ServoBoardTemp = 0.0f;
		m_PDSupplyVoltage = 0.0f;
		m_DSPCoreSupplyVoltage = 0.0f;
		m_DSPIOVoltage = 0.0f;
		m_AnalogSectionVoltage = 0.0f;
		m_ADConverterSupplyVoltage = 0.0f;
		m_PDSupplyCurrent = 0.0f;
	}
	~IntelliScanState() {}
	static string GetStopEventInfo(int ivalue, bool& bvalue)
	{
		string info = _(u8"没有").c_str();
		bvalue = false;
		switch (ivalue) {
		case 0x10: {
			info = _(u8"摆镜到达危险边缘位置").c_str();
			bvalue = true;
		}break;
		case 0x20: {
			info = _(u8"AD转换错误").c_str();
			bvalue = true;
		}break;
		case 0x30: {
			info = _(u8"扫描系统温度越限").c_str();
			bvalue = true;
		}break;
		case 0x40: {
			info = _(u8"外部电压过低").c_str();
			bvalue = true;
		}break;
		case 0x50: {
			info = _(u8"标志不合法").c_str();
			bvalue = true;
		}break;
		case 0xD0: {
			info = _(u8"看门狗超时").c_str();
			bvalue = true;
		}break;
		case 0xE0: {
			info = _(u8"振镜位置到达超时").c_str();
			bvalue = true;
		}break;
		}
		return info;
	}
public:
	//bool m_IsInternalVoltagesNormal;  //内部电压正常
	bool m_GalvanometerScannerTempOK;	//振镜预热完成
	float m_ActualPosition;				//真实位置
	float m_SetPosition;				//设值位置
	float m_PositionError;				//位置误差
										//float m_ActualCurrent;				//真实电流
										//float m_ActualVelocity;				//真实速度
	float m_GalvanometerScannerTemp;		//振镜温度
	float m_ServoBoardTemp;				//伺服板卡温度
	float m_PDSupplyVoltage;			//PD供电电压
	float m_DSPCoreSupplyVoltage;		//DSP核心供电电压
	float m_DSPIOVoltage;				//DSP输入输出电压
	float m_AnalogSectionVoltage;		//模拟区电压
	float m_ADConverterSupplyVoltage;	//AD转换供电电压
	float m_PDSupplyCurrent;			//PD供电电流
	bool m_IsGalvanometerScannerOutputStageOn;		//振镜输出级生效
	bool m_IsGalvanometerScannerHeaterOutputStageOn;	//振镜加热器输出级生效
	bool m_IsInternalVoltagesNormal;			//内部电压正常
	bool m_IsPositionErrorNormalRange;  //位置误差正常
	bool m_IsScannerAndServoBoradTempNormal;		//振镜和伺服温度正常
	bool m_IsBootingProcessCompleted;		//启动处理完成
	bool m_IsCriticalError;			//发生严重错误
	bool m_IsExternalPowderLow;		//外部电压欠压
	bool m_IsScanSystemTempOverLimit;		//扫描系统超温
	bool m_IsADConverterSuccessfullyInit;		//AD转换初始化成功
	bool m_IsScannerReachedCriticalEdgePos;		//振镜到达临界边缘位置
	bool m_IsAllControlParametersValid;			//允许控制参数
	bool m_IsADConverterVoltageOK;				//AD转换供电正常
	bool m_IsAnalogSetionVoltageOK;			//模拟区电压正常
	bool m_IsDSPIOVoltageOK;				//DSP 输入输出电压正常
	bool m_IsDSPCoreVoltageOK;			//DSP核心供电正常
	bool m_IsAGCVoltageOK;				//AGC电压正常
	bool m_IsServoBoradOperationTempNormal;		//伺服板卡操作温度正常
	bool m_IsGalvanometerScannerOperationTempNormal;		//振镜操作温度正常
	int m_LowState;
	int m_HighState;
	int m_StopEven;
};

class ScanStateXY {
public:
	ScanStateXY() {}
	~ScanStateXY() {}
public:
	bool m_IsConnected;
	UINT m_LastError;
	IntelliScanState m_X;
	IntelliScanState m_Y;
	IntelliScanState m_Focus;
};